Home/Solutions / Commercial
Flooring Solutions for Commercial Projects
Commercial floors face heavy foot traffic and rolling loads. Emosin supplies SPC and LVT flooring for offices, shops and public spaces, with wear layer and installation method matched to the project.
Commercial floors are chosen by wear layer and installation method, because foot traffic and rolling loads set the minimum specification.
Selection guide
Recommended flooring
| Area / need | Suggested product | What to check |
|---|---|---|
| Offices | Click lock or glue down SPC | Wear layer and acoustic needs |
| Retail | Glue down SPC or dry back LVT | Rolling loads and traffic level |
| Public corridors | Glue down SPC / LVT with a thicker wear layer | Wear layer stated on the quotation |
| Quick refit | Loose lay or self adhesive LVT | Subfloor condition and downtime |
Performance
What we can document
| Item | Value |
|---|---|
| Wear layer | Specified per order and stated on the quotation and inspection report |
| Laminate AC rating | AC3 to AC5, as ordered |
| Certificates | EN 14041:2018 for SPC (EUROCERT); ISO 9001, ISO 14001, ISO 45001 |
| Test reports | SGS reports on request |
Only values with a test report are listed. Reports are available on request.
Installation and care
What to plan before laying
Wear layer
Match the wear layer to the traffic level and state it in the order.
Installation method
Glue down for heavy rolling loads; click lock where access or speed matters.
Transitions
Plan expansion joints and transitions at large openings and long runs.
Maintenance
Dust mop and damp clean; use protective pads under heavy furniture.
FAQ
Questions buyers ask
If your question is not covered, send it with your market and product line.
What wear layer do I need for an office?
It depends on traffic and rolling loads. Send the project type and traffic level and we will propose a specification with the wear layer stated in writing.
Glue down or click lock?
Glue down is common for heavy rolling loads and large areas; click lock is faster to install and easier to lift.
Can I get test reports?
Yes. The EN 14041:2018 certificate for SPC is available, and SGS reports are provided on request.
Next step
Submit your project requirements
Send the area, product direction and schedule. We reply with a specification and next steps.